Access Levels

Access levels are assigned to users. When a user is assigned an access level that user is able to access the programmed options within the access level. The access level determines what they can do in the system and contains Alarm Areas, Doors, and Keypad Menus.

Configuration

  • Operating Schedule: Determines when the access level is valid
  • Time to Activate Output (seconds): Defines the time the access level output is activated for. This option overrides the activation time programmed under the output.
  • Enable Multi-badge Arming: Used in conjunction with the Reader Arming Mode (defined under Reader Expander settings) to enable a user to perform various operations when badging their card multiple times
  • Reader Access Activates Output * : When enabled the access level output will activate when a user with this access level presents a valid credential to a reader. For this option to work, the Activate Access Level Output option must be turned on for the reader used.
  • Keypad Access Activates Output * : When enabled the access level output will activate when a user with this access level enters a valid user code at a keypad. For this option to work, the Activate Access Level Output option must be turned on for the keypad used.
  • Activate Output Until Access Level Expiry * : When enabled the output will be activated for the duration of the access level expiry period as set in the user record.

  • Toggle Access Level Output * : When enabled the access level's output state will be toggled when access is granted.

    Note: Only one of Activate Output Until Access Level Expiry and Toggle Access Level Output may be selected. Checking one replaces the other.

Commands

  • Commands * : Used to send manual commands to a device.